DAU
The Pictogram feature on DAU is quite simple. As per the install guide: If the unit is not operating in this manner check setting P121 = 1 (EN81-28...
Wed, 20 Oct, 2021 at 5:30 PM
The Guidance message on DAU / DCP can by remotely reset by sending the following SMS command: Pin1234,p0509,15,1,devhub.avire-global.com/assets/firm/...
Mon, 15 Nov, 2021 at 11:56 AM
1. Each DAU must be assigned a unique 8 digit P100 ID in parameter P131 (default 00000000): 2. Then the DCP must be set to the following mode in pa...
Mon, 10 Jan, 2022 at 9:37 AM
First follow DAU update guide here to get the DAU onto the latest firmware: https://avireglobal.freshdesk.com/a/solutions/articles/44002304376?lang=en The...
Mon, 31 Jan, 2022 at 6:39 PM
Before updating the DAU Firmware, ensure the DCP is also on the latest firmware. A guide to do this can be found here: https://avireglobal.freshdesk.com/a/...
Mon, 31 Jan, 2022 at 6:34 PM
The DAU requires the external Alarm Push buttons to be voltage free, if not you will need to wire a separate relay in circuit.
Thu, 7 Apr, 2022 at 5:22 PM