Check Navigation Box Learning:


  1. Check the value of the learned floor heights at any time in the NavBox “Device Calibration” area on the Hub under P198:



2. It would be expected for P198 look something like this:


000000041801060014450183002215026000298503370037550414004525 


Which equates to (in cm):


Floor 0 = 00000 

Floor 1 = 00418

Floor 2 = 01060 

Floor 3 = 01445 

Floor 4 = 01830 

Floor 5 = 02215 

Floor 6 = 02600  

Floor 7 = 02985 

Floor 8 = 03370 

Floor 9 = 03755 

Floor 10 = 04140 

Floor 11 = 04525



3. In the above example, it can be estimated that the customer has the following type of elevator:


Floor 0 height = 000 cm

Floor 1 height = 418 cm

Floor 2 height = 1060 cm

The remaining floors are then all the same height increasing by 385cm each time up to floor 11.