A separate handset with a keypad will be required to be connected to ‘J1A’ on the DCP. Please note, the telephone handset will require an RJ11 plug to enable connection to the DCP. The cover on the DCP will need to be removed to gain access to this connector. Plug in the handset to enter the Configuration Mode.
Using the Handset keypad press: *#*1234*#* (You will hear "Enter Option")
To Record a message, press *095# …record your Message by speaking directly into the handset microphone
To listen to your recorded message, press #
To confirm and save your recorded message, press *094*