SMS Troubleshooting:
To contact a DCP send an SMS message to the device phone number in the exactly the following format: Pin1234,P0XX where XX is the parameter you want to check or modify.
- Send: Pin1234,P003? Check the DCP Firmware. You can also check if a device is 2G or 4G by looking for either GSM R2 (2G) or GSM R6 (4G). you can expect an SMS response within 5 minutes.
- Send: Pin1234,P005? SIM Card CCID Number - useful when creating or checking a Hub Installation. If the communication
- Send: Pin1234,P007? Useful for checking number of connected DAU’s and what shaft they are configured as. C1000 shows there is 1 cabin DAU in shaft 1. P1110 would show there are 3 Pit Phones installed in Shafts 1, 2 & 3.
- Send: Pin1234,P0941 Force a background test (DCP will try to contact Avire Hub)
- Send: Pin1234,P0951234567890 Remote reset of the DCP. Effectively a reboot of the device, no settings are lost.
- Send: Pin1234,P0947xxxxxx Force an alarm call to any number, replace xxxxxx with your own phone number to test.
- Send: Pin1234,P091011 P091 is the super setting parameter. Setting this parameter to 011 will set the DCP to Default settings for an Avire SIM and connecting to the Avire Hub.