This method can be used on new or earley version memcom
Use Up/down arrow to scroll through depending on how many Alarm numbers are being programmed (4 max emergency Alarm numbers can be programmed 11-14)
15 and 16 numbers are Tech and background monitoring numbers.
- Type 1234#
- Press the UP arrow once (this will take you to the first number)
- Enter new telephone number and then press # to confirm i.e. (*11) 0123456789 # (3 bleeps are heard for number programmed)
- Press UP arrow to next number if programming more then one number (*12,*13,*14) follow the same method as programing first number, above instructions (Enter new telephone number and then press # to confirm)
- Once all programmed press # then *01# to exit programming
New version Memcoms ‘1 Programming‘ the new updated version gives you two options to program, one it allows you to program using the early method *1234# or by pressing 1 to enter programming structure
- Press 1
- Use * to go back or use # to accept (this will disapear after a couple of seconds)
- Screen will show a selection of programming options
- Press # to select option required
- ‘Quick start‘ this option will allow you to enter one number
- Programming more then one number the select TEL numbers
- Use arrow to select Tel numbers
- Press #
- Select first number, program emergency number press #
- Select Guided or unguided (Guided prefered, if location message is programmed this will play an automated instruction message on how to answer the call and to and retrievethe location of the site. Unguided plays no message
- Once programmed keep pressing the * key to go back until exit programming